Apr 15, 2020
Brake lights are a crucial safety feature and whether it’s night or day, they need to be in perfect working condition. Without them, other road users will not know if you are slowing down and this runs the risk of a collision happening. By ignoring brake lights that are out or faulty, you can get a fine. Therefore, you must check on a regular basis that your brake lights are in perfect working order!
When you push the brake pedal, a switch is triggered to send a signal to the lights at the rear of your vehicle that it time to turn on. These switches are likely to wear out over time, and they can get dirty too which will interfere with their ability to make positive contact and transmit the right signal. Replacing brake pedal switch is not a major job and mechanics can easily test brake light problems like this one. In this case, you will find all 3 of your bulbs have bust simultaneously.
If the brake switch is good but the car’s brake lights are not illuminating on either side, then the next step is to check the brake light fuse. Locate your car’s fuse box and find the fuse for the brake circuit to make sure it hasn’t been blown. If it has, replace it with a fuse of the same resistance.
If you only have a single brake light out and the bulb is good, the next step is to check the light socket. Brake light problems can be due to a socket with a dirty or corroded socket, or one whose wiring has become worn. Replacing the socket is as simple as snipping the old wires and splicing in the new unit. This is typically an inexpensive part to repair.
If you’re experiencing car brake light issues and need to find a replacement, typically this can be done at home. Bulbs can be purchased online from as little as £5, however, be sure to check your manufacturers guidelines on which bulb is required. If you keep experiencing bust brake lights it may be time to bring your car to the mechanic, find one near you today with MyCarNeedsA.com! Get your quote www.mycarneedsa.com/get-a-quote/
